Shure Axient AD4DNP B Band Two-Channel Digital Wireless Receiver - Superior Performance
The AD4D Axient Digital Dual Receiver is a game-changer! It offers groundbreaking performance with features like wide tuning, low latency, and High Density (HD) mode. This ensures rock-solid performance even in the toughest RF environments. Networked control and signal routing options add a new level of flexibility to your workflow. Compatible with all Axient Digital transmitters.
Features:
- • Wide tuning range up to 184MHz for seamless operation
- • True digital diversity reception per channel for reliable signal
- • Networked control via Wireless Workbench and ShurePlus Channels app for easy management
Benefits:
- • Front panel headphone jack enables convenient Dante Cue and Dante Browse monitoring
- • Configurable Ethernet switch for redundant Dante digital output for added reliability
- • Channel Quality meter displays RF signal-to-noise for better performance assessment
Specifications:
- Dimensions: 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.), H × W × D
- Weight: 4.6 kg (10.1 lbs), without antennas
- Housing: Steel; Extruded aluminum
- Power Requirements: 100 to 240 V AC, 50–60 Hz; 0.26 A max.
- Thermal Dissipation:
- Maximum: 23 W (78 BTU/hr)
- Idle: 15 W (52 BTU/hr)
- Audio Output:
- Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
- Configuration:
- 1/4' (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
- XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
- Impedance (Typical, XLR Line out): 100Ω
- Full Scale Output (200 kΩ load):
- 1/4' (6.35 mm): +8 dBV
- XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: Yes
- Networking:
- Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Ethernet Cable Length: 100 m (328 ft)
- Cascade output:
- Connector Type: BNC
- Configuration: Unbalanced, passive
- Impedance: 50 Ω
- Insertion Loss: 0 dB, typical
- RF Input:
- Spurious Rejection: >80 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Bias Voltage: 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
- RF Carrier Frequency Range: B: 606–810 MHz


This Shure Axient AD4DNP B Band Two-Channel Digital Wireless Receiver is perfect for professionals in the audio industry. Whether you're setting up a live event, recording in a studio, or broadcasting, it provides reliable performance. With dimensions of 44 mm × 483 mm × 333 mm and weighing 4.6 kg (without antennas), it's compact and easy to handle. It operates on 100 to 240 V AC, 50–60 Hz with a maximum current of 0.26 A.