JBL PD5122 Dual 12-Inch High-Power Low-Frequency Loudspeaker
Get ready to experience mind-blowing sound with the JBL PD5122! This high-power low-frequency module is perfect for both flown and ground-supported setups, designed to work seamlessly with mid/high-only or full-range systems of the PD5000 series.
Features:
- • Dual 300 mm (12 in) high-power low-frequency drivers for thunderous bass
- • Engineered to extend LF pattern control of PD6322 systems
- • Slot-loaded configuration replicates LF performance of PD6322
Specifications:
- • Frequency Range: 41 Hz to 1 kHz (-10 dB)
- • Frequency Response: 49 Hz to 300 Hz ( ± 3 dB)
- • Transducer Power Rating (AES): 1600W (6400 W peak) 2 hrs
- • Long-Term System Power Rating (IEC): P1200 W (4800 W peak), 100 hrs
- • Maximum SPL: 128 dB-SPL cont avg (134 peak)
- • Input Modes: Drivers Parallel / Drivers Discrete
- • Nominal Impedance: 4 ohms in parallel-drive mode
- • Sensitivity(1W, 1m): 116 dB-SPL
- • Low Frequency Driver: 2 x JBL 2206H 300 mm (12 in) VGC drivers with 100 mm (4 in) voice coil for minimal power compression and low distortion
- • Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
- • Sensitivity (1W, 1m): 109 dB-SPL14 dB-SPL
- • Waveguides: MF: PT-N64MF 600 x 600 mm (24 x 24 in) HF: PT-H64HF 300 x 300 mm (12 x 12 in)
- • Enclosure: Trapezoidal with 15 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood.
- • Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).
- • Finish: Black DuraFlex finish. White (-WH) available upon request.
- • Optional Weather Resistant Versions: WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments.
- • Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)
- • Input Connectors: Neutrik Speakon NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.
- • Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX.
- • Dimensions (H x W x D in vertical orientation): 357 x 673 x 706 mm (14.1 x 26.5 x 27.8 in)
- • Net Weight: 36.4 kg (80 lb)
- • Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts
The JBL PD5122 is a high-power low-frequency loudspeaker designed for professional audio setups. It's ideal for musicians, event organizers, and anyone who demands top-notch sound. Use it as a flown or ground-supported module with mid/high-only or full-range systems. Technical specs include dimensions of 357 x 673 x 706 mm (14.1 x 26.5 x 27.8 in) and a net weight of 36.4 kg (80 lb).
