JBL IVX-587121 Intellivox DS430 Column Speaker with 16 Channel Class-D Amplifier (Amp at Top)

JBL Intellivox DS430 Column Speaker with 16 Channel Class-D Amplifier - Superior Sound for Any Space

The Intellivox-DS430 is a top-notch column speaker that offers exceptional sound quality and performance. Here's why it's a must-have:

• • Wide Coverage: Covers up to 50 m area with an even sound pressure level, perfect for large spaces.
• • Custom Design: Seventeen 4” loudspeakers driven by a 16-channel class-D amplifier ensure powerful and clear sound.
• • User-Friendly Control: Controlled via proprietary WinControl software for easy beam steering, audio processing, and surveillance.

The Intellivox-DS430 is suitable for a variety of applications, including public spaces, commercial buildings, and educational institutions. Its advanced features make it ideal for delivering clear announcements and background music in large areas. Whether you need to cover a stadium, a shopping mall, or a school auditorium, this speaker has got you covered.

With its wide horizontal dispersion and vertical beam shaping, the Intellivox-DS430 ensures that the sound reaches every corner of the room. The 32-bit floating point DSP provides precise audio processing, while the dual line inputs and volume control allow for easy integration with existing sound systems.

The speaker also offers a range of surveillance functions, making it suitable for voice alarm applications. It can be easily controlled using the WinControl software, which offers user-friendly control of beam steering parameters, audio processing, pre-sets, and surveillance features.

Features:

• Superb Speech Intelligibility
• Slim Unobtrusive Design
• Extended Frequency Response
• Wide Horizontal Dispersion
• Vertical Beam Shaping (DDS Technology)
• 32-bit floating point DSP
• Control of Vertical Beam Shaping
• Dual Line Inputs
• Volume Control
• Delay (up to 20 seconds)
• 8 band parametric EQ
• 8 user definable, password protected presets on board (recallable through third party control devices)
• AVC (Automatic Volume Control) via build-in ambient mic.
• Upgradeable firmware
• Network Ready
• Integral Surveillance
• Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3

Specifications:

• Acoustical:
  • Frequency range:
    • 4' loudspeaker: 230 - 10k Hz (+/-3 dB)
    • Complete array: 130 - 20k Hz (+/-3 dB)
  • Max SPL:
    • Continuous: 92 dB SPL (A-weighted at 30 m)
    • Peak: 95 dB SPL (A-weighted at 30 m)
  • Coverage:
    • Horizontal (fixed): 130° (-6 dB, averaged 1k to 4k Hz)
    • Vertical (adjustable): Defined by the DDS algorithm
  • Typical throw: 50 m
  • Dynamic range: >100 dB
• Electrical:
  • Input:
    • Nominal level: 0 dBV (RMS, line input)
    • Maximum level: +19 dBV (peak, line input)
    • Type: Dual line input, transformer balanced
    • Impedance (balanced): 6k8 Ω
  • DSP module:
    • Type: Floating point 900 MFLOPS 32 bits
    • Memory: 64 Mb SDRAM + 3 Mb non-volatile
    • AD DA conversion: 24 bits sigma-delta 128x oversampling
    • Auxiliary processor: 200 nsec single cycle RISC
    • Sample rate: 48.8 kHz (default)
    • Latency: 3.7 ms
  • Signal processing:
    • 21 sec (pre-delay) + 2 x 10 sec (input channel delay)
    • Equalizer and compensation filtering
    • Volume control
    • Innavidual RMS and peak limiters on each output
    • Ambient noise level dependent gain adaptation ('fail-safe')
    • Sixteen output filters + delay ring buffers
    • Dual input configuration
• Control unit:
  • Network interface type: Serial full-duplex RS-485, auto-switching 115k2, 57k6, 38k4, 19k2 baud, optically isolated
  • Maximum number of units: 126 units
  • Remote surveillance:
    • General status (DSP running, signal present etc.)
    • Amplifier monitoring and load monitoring schemes
    • External pilot tone detection (20k5 - 28k Hz, level >= -22 dBV)
    • Built-in ambient noise microphone, override through external ambient mic
    • Frost protection
    • Fan control for optional external fan (24 V DC / 3 W max.)
    • Thermal overload protection
  • Failure:
    • Internal hardware bypass circuit
    • Failure relay (external connector, maskable conditions) SPDT 100 mA / 24 V
    • Jumper configurable for volt-free or impedance-sensing (10k / 20k Ω) operation
    • Failure status indicated at front by bi-colour LED
• Power amps:
  • Type: PWM (class D)
  • Power: 16 x 40 W RMS (4 ohm)
• Protection
  • Thermal shutdown if Tjunction > 150°C
  • Current limiting output stage
• Connectors:
  • General type: 5 mm pitch cage clamp (as WAGO series 231)
  • Audio inputs: 6p male
  • RS-485 interface: 5p male
  • Ambient noise and temp sensor: 5p female
  • Failure detect and fan control: 5p female
• PSU:
  • Mains: 3p IEC
  • Mains voltage (+5/-10 %): 230 or 115 V
  • Mains fuse(s): 1 x 6.3 A (slow type)
  • Power consumption: 84 VA (idle) / 407 VA (male speech STIPA) / 750 VA (full load)
  • Power factor: 0.55 (idle) / 0.60 (full load)
  • Max mains inrush current: 25 A short-time peak (@ 230 V)
• Protection:
  • Thermal protection
  • Output current limiting
  • Under-voltage lock out

The JBL Intellivox DS430 Column Speaker is perfect for public spaces, commercial buildings, and educational institutions. It offers wide coverage of up to 50 m with an even sound pressure level. The speaker is 17 custom designed 4” loudspeakers driven by a 16-channel class-D amplifier. It can be controlled via proprietary WinControl software for easy beam steering, audio processing, and surveillance.