Audio-Technica ATM350S: The Ultimate Condenser Instrument Microphone for Effortless Performance
Designed for accordions and other tricky-to-mike instruments, the ATM350S UniMount system gives you the confidence to perform. It features the ATM350a cardioid condenser microphone, delivering a clear, well-balanced response from any instrument.
When paired with the included AT8491S surface mount and flexible AT8490 5' gooseneck, the mic can be securely attached to an accordion or other instrument with a challenging surface and stay in place during play. The cardioid polar pattern reduces side and rear pickup, and the switchable 80 Hz high-pass filter controls low-frequency noise. The system also includes an AT8468 violin mount and a protective case.
Features:
- • Low-profile design for discreet use
- • Crisp, clear sound even at high volumes
- • Cardioid pattern for excellent sound isolation
- • UniMount surface mount for secure attachment
- • Rugged 5' gooseneck for precise positioning
- • In-line power module with high-pass filter
- • Interchangeable elements for different polar patterns
- • Included violin mount for additional options
Specifications:
- Headphones:
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40 – 20,000 Hz
- Low Frequency Roll Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
- Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 130 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11– 52V DC, 3.5 mA typical
- Switches: Flat, roll-off
- Weight:
- Microphone: 14.5 g (0.5 oz)
- Power module: 90 g (3.2 oz)
- Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13') diameter, 2-conductor shielded cable with HIROSE HR10-type connector
- Dimensions:
- Microphone: 37.8 mm (1.49'') long, 12.2 mm (0.48'') maximum body diameter
- Power module: 92 mm (3.62') long, 18.9 mm (0.74') diameter
- Dimensions (Power Module): 92 mm (3.62') long, 18.9 mm (0.74') diameter
- Dimensions (Microphone): 37.8 mm (1.49'') long, 12.2 mm (0.48'') maximum body diameter
- Output Connector (Power Module) Integral: 3-pin XLRM-type
- Output Connector:
- Power module: Integral 3-pin XLRM-type
- Optional Interchangeable Elements: UE-H hypercardioid (100°); UE-O omnidirectional (360°)
- Accessories Included: ATM350a cardioid condenser microphone; AT8543 power module; AT8491S UniMount surface mount; AT8475 surface mounting kit; AT8490 UniMount 5' gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case
- Audio-Technica Case Style: M36
The Audio-Technica ATM350S is a condenser instrument microphone designed for accordions and other tricky-to-mike instruments. It features a low-profile design, crisp and clear sound, and excellent sound isolation. The microphone has a cardioid polar pattern, a UniMount surface mount for secure attachment, and a rugged 5' gooseneck for precise positioning. It also has an in-line power module with a switchable 80 Hz high-pass filter and interchangeable elements for different polar patterns. The microphone weighs 14.5 g (0.5 oz) and the power module weighs 90 g (3.2 oz). The cable is 4.0 m (13.1') long and has a diameter of 3.2 mm (0.13'). The microphone is 37.8 mm (1.49'') long and has a maximum body diameter of 12.2 mm (0.48''). The power module is 92 mm (3.62') long and has a diameter of 18.9 mm (0.74'). The output connector on the power module is an integral 3-pin XLRM-type. Accessories included are the ATM350a cardioid condenser microphone, AT8543 power module, AT8491S UniMount surface mount, AT8475 surface mounting kit, AT8490 UniMount 5' gooseneck, AT8468 violin mount (hook-and-loop fastener), and a protective carrying case. Ideal for musicians looking for a reliable and high-quality microphone for their instruments.
